3com V7111 User Manual
7
In the ‘Gateway Name’ field, enter a name to the device. (For example: ‘gateway1.com’).
Ensure that the name you choose is the one that the Call Manager/Agent is configured
with to identify your V7111.
Ensure that the name you choose is the one that the Call Manager/Agent is configured
with to identify your V7111.
8
In the ‘Endpoint Name’ field, enter an intuitive endpoint name. Ensure that the endpoint
name you choose is the one that the Call Agent works with.
name you choose is the one that the Call Agent works with.
9
In the ‘Endpoint Numbering Offset’ field, you can enter a value to offset the numbers that
represent the gateway’s endpoints.
represent the gateway’s endpoints.
10
Click the Reset button and click OK in the prompt; the V7111 applies the changes and
restarts. This takes approximately 2 minutes to complete. When the V7111 has finished
restarting, the Power and Ready LEDs on the front panel are lit green.
restarts. This takes approximately 2 minutes to complete. When the V7111 has finished
restarting, the Power and Ready LEDs on the front panel are lit green.
MGCP users should continue with
Configuring Basic H.323 Parameters
After accessing the Embedded Web Server (see
) the
H.323 ‘Quick Setup’ screen is displayed, shown in
.
Figure 20
V7111 H.323 Quick Setup Screen
34
3Com VCX V7111 Analog Gateway Installation Guide