3com V7111 User Manual
4
Click OK; the ‘Quick Setup’ screen is accessed, shown in
(MGCP),
(H.323), and
(SIP).
Basic Control Protocol Parameters
To configure the V7111 basic control protocol parameters use the Embedded Web Server’s
‘Quick Setup’ screen.
‘Quick Setup’ screen.
For MGCP, see
For SIP, see
When you have completed the above relevant section you are then ready to start using the
V7111. For information on how to fully configure the VoIP gateway, refer to the V7111 User’s
Manuals.
V7111. For information on how to fully configure the VoIP gateway, refer to the V7111 User’s
Manuals.
Once the gateway is configured correctly, back up your settings by making a copy
of the VoIP gateway configuration (
of the VoIP gateway configuration (
ini file) and store it in a directory on your PC.
This saved file can be used to restore configuration settings at a future time. For
information on backing up and restoring the gateway’s configuration, see
information on backing up and restoring the gateway’s configuration, see
The following configuring Sections from here up to and including
apply individually to MGCP, H.323, or SIP.
MGCP configuring continues with
.
H.323 configuring continues with
.
SIP configuring continues with
.
Configuring Basic MGCP Parameters
After accessing the Embedded Web Server (see
) the
MGCP ‘Quick Setup’ screen is displayed, shown in
32
3Com VCX V7111 Analog Gateway Installation Guide