ZyXEL Communications EMG5324-D10A User Manual
Chapter 1 Introduction
EMG5324-D10A User’s Guide
21
Refer to the Quick Start Guide for information on hardware connections.
PHONE1-2
Green
On
A SIP account is registered for the phone port.
Blinking
A telephone connected to the phone port has its receiver off of
the hook or there is an incoming call.
the hook or there is an incoming call.
Orange
On
A SIP account is registered for the phone port and there is a
voice message in the corresponding SIP account.
voice message in the corresponding SIP account.
Blinking
A telephone connected to the phone port has its receiver off of
the hook and there is a voice message in the corresponding SIP
account.
the hook and there is a voice message in the corresponding SIP
account.
Off
The phone port does not have a SIP account registered.
INTERNET
Green
On
The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used).
DHCP server), PPP negotiation was successfully completed (if
used).
Blinking
The Device is sending or receiving IP traffic.
Off
The Device does not have an IP connection.
Red
On
The Device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed.
WAN
Green
On
This light applies when the Device is in Ethernet WAN mode. The
Device has an Ethernet connection with a device on the WAN.
Device has an Ethernet connection with a device on the WAN.
Blinking
The Device is sending or receiving data to/from the Ethernet
WAN.
WAN.
Off
The Device does not have an Ethernet connection with the WAN.
ETHERNET1-4
Green
(Giga
Ethernet)
(Giga
Ethernet)
On
The Device has a successful 1000 Mbps Ethernet connection with
a device on the Local Area Network (LAN).
a device on the Local Area Network (LAN).
Blinking
The Device is sending or receiving data to/from the LAN at 1000
Mbps.
Mbps.
Orange
(Fast
Ethernet)
(Fast
Ethernet)
On
The Device has a successful 10/100 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
with a device on the Local Area Network (LAN).
Blinking
The Device is sending or receiving data to/from the LAN at 10/
100 Mbps.
100 Mbps.
Off
The Device does not have an Ethernet connection with the LAN.
POWER
Green
On
The Device is receiving power and ready for use.
Blinking
The Device is self-testing.
Red
On
The Device detected an error while self-testing, or there is a
device malfunction.
device malfunction.
Off
The Device is not receiving power.
WLAN/WPS
Green
On
The wireless network is activated and is operating in IEEE 802.11
“b”, “g” or “n” mode.
“b”, “g” or “n” mode.
Blinking
The Device is communicating with other wireless clients.
Orange
On
The WPS is configured.
Blinking
The Device is setting up a WPS connection.
Off
The wireless network is not activated.
Table 1
LED Descriptions (continued)
LED
COLOR
STATUS
DESCRIPTION