ZyXEL Communications EMG5324-D10A User Manual
Chapter 3 Tutorials
EMG5324-D10A User’s Guide
33
6
Click Connection Status > System Info.Verify your wireless and wireless security settings under
Device Information and check if the WLAN connection is up under Interface Status.
Device Information and check if the WLAN connection is up under Interface Status.
Tutorial: Network > Wireless LAN > SecuritOpen the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status
Tutorial: Status
This finishes the configuration of the AP.
3.2.3 Configuring the Wireless Client
This section describes how to connect the wireless client to a network.
3.2.3.1 Connecting to a Wireless LAN
The following sections show you how to join a wireless network using the ZyXEL utility, as in the
following diagram. The wireless client is labeled C and the access point is labeled AP.
following diagram. The wireless client is labeled C and the access point is labeled AP.
Wireless LAN Setup
There are three ways to connect the client to an access point.
• Configure nothing and leave the wireless client to automatically scan for and connect to any
available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific network or peer
• Configure a profile to have the wireless client automatically connect to a specific network or peer
computer.
This example illustrates how to manually connect your wireless client to an access point (AP) which
is configured for WPA-PSK security and connected to the Internet. Before you connect to the access
is configured for WPA-PSK security and connected to the Internet. Before you connect to the access
C
AP