ZyXEL Communications EMG5324-D10A User Manual
Chapter 3 Tutorials
EMG5324-D10A User’s Guide
34
point, you must know its Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this
example, the SSID is “SSID_Example3” and the pre-shared key is “12MyWPAPSKpresharedkey34”.
example, the SSID is “SSID_Example3” and the pre-shared key is “12MyWPAPSKpresharedkey34”.
After you install the ZyXEL utility and then insert the wireless client, follow the steps below to
connect to a network using the Site Survey screen.
connect to a network using the Site Survey screen.
1
Open the ZyXEL utility and click the Site Survey tab to open the screen shown next.
Tutorial: Site Survey
2
The wireless client automatically searches for available wireless networks. Click Scan if you want to
search again. If no entry displays in the Available Network List, that means there is no wireless
network available within range. Make sure the AP or peer computer is turned on or move the
wireless client closer to the AP or peer computer.
search again. If no entry displays in the Available Network List, that means there is no wireless
network available within range. Make sure the AP or peer computer is turned on or move the
wireless client closer to the AP or peer computer.
3
When you try to connect to an AP with security configured, a window will pop up prompting you to
specify the security settings. Enter the pre-shared key and leave the encryption type at the default
setting.
specify the security settings. Enter the pre-shared key and leave the encryption type at the default
setting.
Use the Next button to move on to the next screen. You can use the Back button at any time to
return to the previous screen, or the Exit button to return to the Site Survey screen.
return to the previous screen, or the Exit button to return to the Site Survey screen.
Tutorial: Security Settings