ZyXEL Communications FMG3024-D10A User Manual

Chapter 5 Broadband

FMG3024-D10A / FMG3025-D10A Series User’s Guide

Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon 
next to the connection you want to configure. Select Bridge as the encapsulation mode. 

Prefix length

Enter the bit number of the IPv6 subnet mask provided by your ISP.

IPv6 Default 

Gateway 

Enter the IPv6 address of the default outgoing gateway using a colon (:) 
hexadecimal notation.

IPv6 DNS Server

Select whether you want to obtain the IPv6 DNS server addresses 
automatically or configure them manually.

Obtain IPv6 DNS 
info Automatically 

Select this to have the Device get the IPv6 DNS server addresses from the ISP 
automatically. 

Use the following 
Static DNS IPv6 
Address 

Select this to have the Device use the DNS server addresses you configure 
manually.

Primary IPv6 

DNS Server 

Enter the first IPv6 DNS server address assigned by the ISP.

Secondary IPv6 

DNS Server

Enter the second IPv6 DNS server address assigned by the ISP.

6to4 Tunneling 

The 6 to 4 Tunnel fields display when you set the IPv6/IPv4 Mode field to 
IPv4 Only. 

Select 6to4 if the Device is connected to a network that has both IPv6 and IPv4 
and the IPv4 addresses are public IP addresses. In this mode, the Device can 
convert an IPv4 address directly to an IPv6 address. The format is:

2002:[IPv4 address in hexadecimal]::/48

6RD Enable

Select this option to enable IPv6 Rapid Deployment. By enabling this function, 
the Device uses an ISP’s IPv6 address prefix instead of the 2002::/48 prefix. 
The operational domain of 6RD is limited to and controlled by the ISP’s 
network. 6RD hosts are ensured to be reachable from all native IPv6 addresses 
as 6RD only uses relay servers within control of the ISP.

6to4 Tunneling 

Relay Server IP

Enter the tunneling relay server's IPv4 address in this field. 

4 to 6 Tunnel

The 4 to 6 Tunnel fields display when you set the IPv6/IPv4 Mode field to 
IPv6 Only. Enable Dual Stack Lite to let local computers use IPv4 through an 
ISP’s IPv6 network. 

Enable DS-Lite

Enable Dual Stack Lite to let local computers use IPv4 through an ISP’s IPv6 
network.

4to6 Endpoint 

IPv6 Address

Specify the transition router’s IPv6 address.

Apply

Click Apply to save your changes.

Back

Click Back to return to the previous screen.

Broadband Add/Edit: Routing - IPoE  (continued)