Aastra Telecom Pro 160 User Manual

4-8

41-001190-01 Rel. 1.1, Rev. 00 

AastraLink Pro 160 Administrator Guide

If automatic time and date were enabled during the initial administrator setup of 
the system (default set to yes during initial setup), the AastraLink Pro 160 uses the 
Network Time Protocol (NTP) to synchronize its date and time from the Internet 
global time servers. If Internet access is not available, then use the following 
procedure to manually set the date and time for your AastraLink Pro 160.

1

Select Configuration->System->Set Date/Time.

2

In  the  “Date” field, specify the date that the AastraLink Pro displays on the IP phones in your network. 
Default is 7 May 2008. 

3

In the “Time” field, specify the time that the AastraLink Pro displays on the IP phones in your 
network. Default is the current time set on the AastraLink Pro 160.

4

Click <Save> to save your changes.