Aastra Telecom Pro 160 User Manual
Configuring Network Settings
4-16
41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
Editing Local Network Settings
The Local Network parameters you can specify for the AastraLink Pro 160
include:
include:
•
Host Name
Name currently assigned to your AastraLink Pro 160 device. You can rename
the device during initial installation and setup. Otherwise, the AastraLink Pro
160 retains the default host name of “aastralink.”
the device during initial installation and setup. Otherwise, the AastraLink Pro
160 retains the default host name of “aastralink.”
If you add multiple AastraLink Pro 160 devices to your network, they are by
default named “aastralink-1, aastralink-2” etc. You should specify a unique
host name for your AastraLink Pro 160 in order to make the device easily
identifiable on your network.
default named “aastralink-1, aastralink-2” etc. You should specify a unique
host name for your AastraLink Pro 160 in order to make the device easily
identifiable on your network.
The hostname can be up to 10 characters maximum, no spaces or special
characters allowed. For example:
characters allowed. For example:
— Aastra_1 is a valid hostname
— Aastra 1 is not valid (spaces are not allowed)
Note:
If you change the hostname of your AastraLink Pro 160 device, then you have to reboot the
IP phones in order to connect to the new hostname on your network.
•
Domain
Domain name assigned to your AastraLink Pro 160.
•
LAN MAC Address
MAC address assigned to your AastraLink Pro 160.
•
Use DHCP
Enables or disables Dynamic Host Configuration Protocol (DHCP), in order
to support dynamic/static addressing. DHCP is enabled on the AastraLink Pro
160 by default.
to support dynamic/static addressing. DHCP is enabled on the AastraLink Pro
160 by default.
•
IP Address
IP Address assigned to your AastraLink Pro 160.
•
Subnet Mask
Subnet Mask assigned to your AastraLink Pro 160.