Aastra Telecom Pro 160 User Manual
Configuring VoIP Settings
4-60
41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
•
Currently, global phone directory synchronization between AastraLink Pro
160 devices is not supported. Therefore, users can access phone directories
for their local AastraLink IP phone network only.
160 devices is not supported. Therefore, users can access phone directories
for their local AastraLink IP phone network only.
•
AastraLink trunking requires a flat network. The AastraLink devices do not
support UPnP operation through a gateway/router/firewall.
support UPnP operation through a gateway/router/firewall.
•
Before you use the Web UI to configure AastraLink trunks, we strongly
recommend that you do the following:
recommend that you do the following:
— Assign an access digit to each AastraLink Pro 160 device in your
network.
— Make a list of the trunks you want to configure.
— Identify the user name for each trunk you are configuring.
AastraLink Trunking Example
For example, suppose the system administrator wants to configure three trunks:
•
Atlanta/Boston
•
Atlanta/Chicago
•
Boston/Chicago
The administrator begins by assigning access digits to each of the AastraLink Pro
160 devices, as shown in the table below:
160 devices, as shown in the table below:
The system administrator then assigns a user name to each trunk:
AastraLink Pro 160
IP address
Access Digit
Atlanta
10.30.50.125
0
Boston
10.30.60.135
1
Chicago
10.30.70.145
2
Trunk
User Name
Atlanta - Boston
100
Atlanta - Chicago
101
Boston - Chicago
102