Aastra Telecom Pro 160 User Manual
Remote Office Configuration of the AastraLink Pro 160
41-001190-01 Rel. 1.1, Rev. 00
B-9
Remote Office Configuration of the AastraLink Pro 160 (Server-Side)
AastraLink Pro 160 Manual Remote Office Configuration Example
The following is an example of setting up the AastraLink Pro 160 for a remote
office.
office.
Notes:
1. The SIP and HTTP ports both require one mapping only. The RTP ports require a range of 10
ports per phone.
ports per phone.
2.The number of phones you can install behind the same SOHO router is limited by the available
port mapping entries on the routers. In many cases, they are sufficient for three phones behind the
same routers.
port mapping entries on the routers. In many cases, they are sufficient for three phones behind the
same routers.
AastraLink Pro 160 Remote Office Configuration
Step Action
Configure the AastraLink Pro 160
1
Turn on remote office.
2
Enter the external gateway IP address.
3
(Optional) Modify the settings in the local services as applicable to your network.
4
Click <Save>.
Configure Port Forwarding
5
Manually setup the required port forwarding on the Office Router and Home Router.
, and Home Router Port Map settings
Configure the Remote IP Phone
6