Aastra Telecom Pro 160 User Manual

41-001190-01 Rel. 1.1, Rev. 00

3-9

Configuring Aastra IP Phone Profiles

5

In the Last Name field, enter the last name of the new user.

6

In the Password field, enter the password to assign to this new user’s phone.

7

In the Account Type field, select whether the user and user’s phone is an Administrator or User.

8

If this user is also the Operator, click on the “Operator” check box. 

The first IP phone registered with the AastraLink Pro 160 is registered as both an administrator, and 
Operator, by default. 

9

If required, specify a line (line 1 - line 6) for this extension to use for all outgoing calls in the 
“Outgoing Line” field. 

Valid values are Line 1 through Line 6. The default is Any line. 

10

In the Phone Type field, select the phone type for this user. Valid values are:
•

Default is 9143i.

11

In the MAC Address field, enter the MAC address of the phone for this user. You can find the MAC 
address of the phone on a label on the bottom of the phone.

12

In the SIP DID Number field, enter the SIP DID number for this user’s phone. The DID number is the 
number that an outside caller can dial to reach this phone directly without having to go through the 
company’s PBX. The DID is a direct dialed number to this phone.

13

Click <Save> to save your changes.