Aastra Telecom 6735I User Manual
Line Keys, Programmable Keys, and Softkeys
89
41-001451-00 REV00 – 07.2011
Flash Key
You can set a key to generate a flash event when it is pressed on the 6735i. You do this by setting the key to "flash". The
IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the
call is not on hold).
IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the
call is not on hold).
Configuring a Flash Key
Use the following procedure to configure a Flash key on the 6735i IP Phone. The procedure shows the softkey screen as
an example.
an example.
Aastra Web UI
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2.
Select from "Key 1" through "Key 20".
3.
In the "Type" field, select "Flash".
4.
In the "Label" field, enter a label to display on the phone for the key.
Programmable Keys
5.
Select from "Key 1" through "Key 6".
6.
In the "Type" field, select "Flash".
Expansion Module Keys
7.
Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
or
Select from “Key 1” through “Key 60” (M675i).
8.
In the "Type" field, select "Flash".
9.
(M675i) In the "Label" field, enter a label to display on the phone for the key.
10.
Click Save Settings.