Manualsbrain.com
  1. Manuals
  2. Brands
  3. Aastra Telecom
  4. 41-001343-02
  5. User Manual

Aastra Telecom 41-001343-02 User Manual

Download
Page of 876
 Administrator Level Options
41-001343-02 REV04 – 05.2014
3-34
Type of Service (ToS), DSCP
Advanced Network Settings include Type of Service (ToS) and Differentiated Services Code Point (DSCP) for the IP phones. 
VLAN
You can enable or disable VLAN and set specific VLAN IDs and priorities under Network Settings.
Parameter In
IP Phone UI
Parameter in 
Aastra Web UI
Parameters in Configuration 
Files
Description
Type of Service SIP
SIP
tos sip
The Differentiated Services Code Point (DSCP) for SIP packets.
For more information, see Chapter 4, 
.
Type of Service RTP
RTP
tos rtp
The Differentiated Services Code Point (DSCP) for RTP packets.
For more information, see Chapter 4, 
.
Type of Service RTCP
RTCP
tos rtcp
The Differentiated Services Code Point (DSCP) for RTCP pack-
ets.
For more information, see Chapter 4, 
.
Parameter In
IP Phone UI
Parameter in 
Aastra Web UI
Parameters in Configuration 
Files
Description
Global Settings
VLAN Enable
VLAN Enable
tagging enabled
Enables or disables VLAN on the IP phones.
For more information, see Chapter 4, 
on 
.
Other Priority
Priority, Non-IP Packet
priority non-ip
Specifies the priority value for non-IP packets.
For more information, see Chapter 4, 
on 
.
N/A
HPQ Enable
vlan hpq
Enables or disables VLAN High Priority Queue (HPQ) on the IP 
phones.
For more information, see Chapter 4, 
on 
.
LAN Port Settings (Port 0)
Phone VLAN ID
VLAN ID
vlan id
Allows you to configure a VLAN ID that associates with the 
physical Ethernet Port 0 (LAN port).
For more information, see Chapter 4, 
on 
.
SIP Priority
RTP Priority
RTCP Priority
SIP Priority
RTP Priority
RTCP Priority
tos priority map
This parameter is based on the Type of Service (ToS), Differen-
tiated Services Code Point (DSCP) setting for SIP (tos sip param-
eter), RTP (tos rtp parameter) and RTCP (tos rtcp parameter).  It 
is the mapping between the DSCP value and the VLAN priority 
value for SIP, RTP, and RTCP packets.
You enter the tos priority map value as follows:
(DSCP_1,Priority_1)(DSCP_2,Priority_2).....(DSCP_64,Priority_6
4)
where the DSCP value range is 0-63 and the priority range is 0-
7. Mappings not enclosed in parentheses and separated with a 
comma, or with values outside the ranges, are ignored.
For more information, see Chapter 4, 
on 
.