Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

The following paragraphs describe the SIP parameters you can configure on the IP phone. SIP configuration consists of 
configuring:

Autodial Settings

PC Port VLAN ID

VLAN ID

vlan id port 1

Allows you to configure a VLAN ID that associates with the 
physical Ethernet Port 1 (PC port).

For more information, see Chapter 4, 

 

Note:
The PC Port parameters are not applicable to the 6730i IP 
Phone.

PC Port Priority

Priority

qos eth port 1 priority

Specifies the priority value used for passing VLAN packets 
through to a PC via Port 1.

For more information, see Chapter 4, 

 

• Specific parameters are configurable on a global and per-line basis. You can also configure specific parameters using 

the IP Phone UI, the Aastra Web UI, or the configuration files. If you have a proxy server or have a SIP registrar present 
at a different location than the PBX server, the SIP parameters may need to be changed.

• The IP phones allow you to define different SIP lines with the same account information (i.e., same user name) but 

with different registrar and proxy IP addresses. This feature works with Registration, Subscription, and Notify process-
ing. This feature also works with the following types of calls: incoming, outgoing, Broadsoft Shared Call Appearance 
(SCA), Bridged Line Appearance (BLA), conference, transfer, blind transfer.