Aastra Telecom 41-001343-02 User Manual
Operational, Basic, and Advanced Parameters
41-001343-02 REV04 – 05.2014
A-122
No Service Congestion Tone Settings
Status Code on Ignoring Incoming Calls
Switch Focus to Ringing Line
Parameter –
no service congestion tone
no service congestion tone
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
aastra.cfg, <model>.cfg, <mac>.cfg
Description
If enabled, the congestion tone will replace the conventional dial tone when the handset
is off hook, a headset is employed, or the speakerphone is engaged. The congestion tone
is played on a per line basis whereby only the specific lines that are without service are
affected.
is off hook, a headset is employed, or the speakerphone is engaged. The congestion tone
is played on a per line basis whereby only the specific lines that are without service are
affected.
Format
Boolean
Default Value
0 (disabled)
Range
0-1
0 (disabled)
1 (enabled)
0 (disabled)
1 (enabled)
Example
no service congestion tone: 1
Parameter –
sip ignore status code
sip ignore status code
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies the status code that is sent in the response to the server when a user ignores
an incoming call.
an incoming call.
Format
Integer
Default Value
486
Range
Valid SIP final negative response code (Refer to RFC3261)
Example
sip ignore status code: 486
Parameter –
switch focus to ringing line
switch focus to ringing line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies whether or not the UI focus is switched to a ringing line while the phone is in
the connected state.
the connected state.
Format
Boolean
Default Value
1 (enable)
Range
0 (disable)
1 (enable)
1 (enable)
Example
switch focus to ringing line: 1