Aastra Telecom 41-001343-02 User Manual

41-001343-02 REV04 – 05.2014

Parameter – 
call hold reminder frequency

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies the time interval, in seconds, between each ring splash sound on the active line. For 
example, if a call comes into Line 1, and then a call comes into Line 2 and you answer Line 2, 
Line 1 is automatically placed on hold. While on the active Line 2, after 7 seconds, a ring 
splash audio sounds on the line reminding you that the call on Line 1 is still on hold (deter-
mined by the “call hold reminder timer” parameter), and then the ring splash is heard again 
after 60 seconds (determined by this parameter).

Notes:
• You must enable the “call hold reminder” and/or “call hold reminder during active calls” 

parameter(s), and the “call hold reminder timer” parameter, for this parameter to work.

• A value of “0” prevents additional rings.

Integer

60

0-4294967295

call hold reminder frequency: 50

Parameter– 
preferred line

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies the preferred line to switch focus to when incoming or outgoing calls end on the 
phone.

Integer

1

0 (none - disables the preferred line focus feature)
1-9

preferred line: 2

Parameter– 
preferred line timeout

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Specifies the time, in seconds, that the phone switches back to the preferred line after a call 
(incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line.

Integer

0 (the phone returns the line to the preferred line immediately)

0-999

preferred line timeout: 30