Aastra Telecom 57I C53I User Guide
Firmware Installation Information
41-001160-00, Rev 01 Release 2.0
1-5
Overview
Overview
Installation Requirements
The following are general requirements for setting up and using your SIP IP
phone:
phone:
•
A SIP-based IP PBX system or network installed and running with a number
created for the new IP phone.
created for the new IP phone.
•
Adherence to SIP standard RFC 3261.
•
Access to a configuration server where you can store the firmware image and
configuration files.
configuration files.
•
The IP phone must be configured for a specific type of protocol to use. TFTP
is enabled by default. You can configure the following protocols on the IP
phone:
is enabled by default. You can configure the following protocols on the IP
phone:
— TFTP (Trivial File Transfer Protocol)
— FTP (File Transfer Protocol)
— HTTP (Hypertext Transfer Protocol)
— HTTPS (Hypertext Transfer Protocol over Secure Socket Layer)
•
A 802.3af Ethernet/Fast Ethernet LAN
•
Category 5/5e straight through cabling
•
Power over Ethernet (PoE) inline power injector (optional accessory –
necessary only if your network provides no inline power and if you do not use
the IP Phone’s power adapter).
necessary only if your network provides no inline power and if you do not use
the IP Phone’s power adapter).
•
Power adapter (included for models 53i, 55i, and 57i, and 57i CT).
•
Service provider must support 55i SIP IP phone.
Note:
If you set TFTP, the configuration server must be able to accept
connections anonymously.