Aastra Telecom 57I C53I User Guide

Firmware and Configuration Files

41-001160-00, Rev 01  Release 2.0

1-9

Overview

For setting up and configuring the IP phone using either the IP phone UI, the 
Aastra Web UI, or the configuration files, see 

For information about the softkey and programmable key parameters, see 
Appendix A, the section, 

on 

The following procedure describes how to install the firmware and configuration 
files.

1

If DHCP is disabled, manually enter the configuration server’s IP address. For details on setting 
DHCP, see Chapter 4, the section 

 on 

2

Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP 
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP 
phone.

Note: The <phone model> attribute is the IP phone model (i.e., 53i.st, 55i.st)

3

Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the 
configuration server.

Note: The <mac> attribute represents the actual MAC address of your phone. 
(i.e., 00085D030996.cfg).

4

Note: Restart tthe IP phone as described in the section, “How to Restart the IP Phone” on page .