Telular SX5P CDMA2000 User Manual

Before you can use the SX5, you must connect the handset cable. 
1.  Connect the handset cable to the phone jack - see Figure 8.
2.  Connect the handset cable to the handset - see Figure 8.

A wedge is included with the SX5 to be used to position the SX5 for easier viewing of the LCD
screen and keypad. Attaching the wedge is optional. To attach the wedge, use the following 
instructions.
1. Slide the wedge tabs on the thin end of the wedge into the bottom tab slots on the SX5 - see

Figure 9.
NOTE: Holding the wedge at an angle makes it easier to slide the wedge tabs into the 
bottom tab slots.

Wedge slots

Battery tab slot

and screw

Wedge tabs

Wedge tabs

Figure 9 - Battery slot and wedge slots.

Phone jack

Handset cable

Handset

Figure 8 – SX5 handset connection.