Lg Electronics 20A User Manual
●
aria
20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria
20A,
aria
20,
aria
20W
14
Wake-up Call
Button
Procedures
To register wake-up time,
Press TRANS/PGM button.
Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.
Press HOLD/SAVE button for “one-day” or dial # and
Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.
Press HOLD/SAVE button for “one-day” or dial # and
HOLD/SAVE button for “until canceled”. (Confirmation tone is heard.)
Range
The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up
call, one is effective for one-day, the other is effective until canceled.
call, one is effective for one-day, the other is effective until canceled.
To cancel wake-up call,
Press TRANS/PGM button and dial 4 2.
Press HOLD/SAVE button. (Confirmation tone is heard.)
Press HOLD/SAVE button. (Confirmation tone is heard.)
Procedures
Press SPEED button twice.
On the display, you will see the following.
On the display, you will see the following.
Range
DIAL BY NAME
ICM : 1 U_SPD : 2 S_SPD : 3
Select desired type.
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will
see the following:
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
2 : YYYY YYYY YYYYYY
Each station and speed dial number can be assigned to a name. When names are programmed, you may select a speed dial
number by the stored name.
number by the stored name.
Button
Using Dial By Name
Press the VOLUME button to see the next two names.
You may enter characters using the code in “Storing Dial by Name”. The LCD will
You may enter characters using the code in “Storing Dial by Name”. The LCD will
display the first two names which match your input.
To select the name in line 1, press HOLD/SAVE button.
To select the name in line 2, dial 2 and press HOLD/SAVE button.
The call is placed automatically.
To select the name in line 2, dial 2 and press HOLD/SAVE button.
The call is placed automatically.
LCD Language Change
Button
Procedures
Range
Press TRANS/PGM button and dial 5 1 .
The language in LCD is changed into default value.
If pressing TRANS/PGM + 5 1, the language in the LCD is changed to the nation’s
The language in LCD is changed into default value.
If pressing TRANS/PGM + 5 1, the language in the LCD is changed to the nation’s
language.
Available by
Software:
16: Above V4.0
20W: Above V3.0
Software:
16: Above V4.0
20W: Above V3.0
To record the conversation,
Press the programmed {RECORD} button.
To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + # 4 + [HOLD/SAVE]
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + # 4 + [HOLD/SAVE]
To finish the recording,
Press the programmed {RECORD} button again. Or, replace the handset.
Button
Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
Dial 6 5
Confirmation tone is heard and the alarm signal is terminated at all assigned stations.
Confirmation tone is heard and the alarm signal is terminated at all assigned stations.
Two-way Recording
Button
Procedures
While a CO line call, you can record the conversation and it will be saved in its own mailbox.
Range
System Features