Aastra Telecom IP Phone User Manual

Model 57i IP Phone User Guide

 93

2. Enter a server value in the Park Call field to which incoming live calls are parked.

3. Enter a server value in the "Pickup Parked Call" field.

4. Click 

 to save your changes.

Park/Pickup Key Configuration

The programmable method of configuration creates park and pickup softkeys that 
you can configure on the 57i phone.

You can set a softkey as "Park" or "Pickup" and then:

• specify a customized label to display on the Phone UI
• specify a value
• specify which line to use
• specify the state of the park and/or pickup keys

On the IP phone UI, the Park/Pickup feature displays the following:

• When a call comes in, and you pickup the handset, the custom label that you 

configured for the Park softkey displays on the Phone UI. 

• After the call is parked, the label that you configured for the Pickup softkey 

displays on other phones in the network.  You can then press the "Pickup" 
softkey, followed by the applicable value to pickup the call on another phone 
in your network.

You can configure a Park and Pickup programmable configuration using the Aastra 
Web UI.

Key Configuration Using the Aastra Web UI

On the 57i, you configure a Park and/or Pickup key at Operation->Softkeys and 
XML. You enter a key label, and value for a specific line on the phone. The default 
state of the Park configuration is "connected". The default state of the Pickup 
configuration is "idle, outgoing".

Note: For values to enter in this field, see the table 

.

Note: For values to enter in this field, see the table 

.

Note: Applicable values depend on the server in your network (Asterisk, 

BroadWorks, Sylantro, ININ PBX. See the table 

 on 

.