Aastra Telecom IP Phone User Manual

62 Model 57i IP Phone User Guide

Setting a Line Key

You can set a key as an additional line on the 57i. The key acts as a line that behaves 
the same as a hard line key. For more information about the behavior of line keys,see 

on 

You use the Aastra Web UI to set a key as a line. 

Use the following procedure to set a key to function as a line.

1. Click on Operation->Softkeys and XML.

or

Click on Operation->Expansion Module <N>.

2. Click on the Bottom Keys tab or the Top Keys tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.

or
Select from "Key 1" through "Key 10" on the top tab.

4. In the "Type" field, select Line to apply to the softkey.
5. In the "Label" field, enter a label to apply to this softkey.
6. In the "Line" field, select a line to apply to this softkey. 

Valid values are 5 through 9.

7. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or 

uncheck (disable) the states you want to apply to this softkey.

8. Click 

 to save your changes.

Aastra Web UI