Linear AE-100 User Manual

8

Stand-alone Entry Code Programming

A Stand-alone Entry Code is a number entered at the AE-100 keypad to 
request access. Up to 125 4-digit Stand-alone Entry Codes can be set.

✦  NOTE: Each Stand-alone Entry Code programmed reduces the 

Use the programming worksheet supplied to organize the 
Stand-alone Entry Code data prior to entering it into the system.
For each of the following steps, enter the Master Password and enter 
Programming Mode (if the unit is not already in that mode). Exit 
Programming Mode when all programming is complete.

Adding a Stand-alone Entry Code

Stand-alone Entry Codes are entered individually.

1. Press     

2.  Enter the new Stand-alone Entry Code.
3. Press 
4.  Enter the new Stand-alone Entry Code again for verifi cation.
5. Press 

Deleting a Stand-alone Entry Code

Stand-alone Entry Codes can be deleted individually (to delete all 
Stand-alone Entry Codes, see programming Step 93).

1. Press     

2. Enter 

the 

Stand-alone Entry Code to delete.

3. Press 
4. Enter 

the 

Stand-alone Entry Code to delete again.

5. Press 

33#CODE#CODE#

CODE = THE STAND-ALONE ENTRY CODE TO DELETE
CODE = THE STAND-ALONE ENTRY CODE
             AGAIN FOR VERIFICATION

31#CODE#CODE#

CODE = NEW STAND-ALONE ENTRY CODE
CODE = NEW STAND-ALONE ENTRY CODE
             AGAIN FOR VERIFICATION