Mitel IP DECT Stand User Manual

Mitel

® 

5000 CP IP DECT Stand Configuration and Administration Guide – Issue 1.0, May 2010

Page 15

After configuring the handsets, change the default user name and the default PIN code to 
prevent unauthorized access. Note that the handset PIN code and the Configurator web 
interface password are independent of each other. If you change the handset PIN code, it does 
not affect the Configurator web interface password.

1. 

From Idle mode, press the OK key, select Settings, and then press the OK key.

2. Select 

System settings and press the OK key. When prompted for a PIN code, enter 

the PIN code (default 0000), and then press the OK key.

3. Select 

Handset settings and press OK.

4. Select 

Handset name and press OK.

5. Use 

the 

Erase key to delete the existing default name (for example, Handset 1).

6. 

Enter the handset display name using the dial pad keys. To enter spaces and special 
characters, press Options and then press Insert symbols. Ensure that the handset 
display name is the same as the name that appears in the 5000 CP database for the 
handset extension number.

7. Press 

OK. Save is displayed. Press Yes.

1. 

From Idle mode, press the OK key, choose Settings, and then press the OK key.

2. Choose 

VoIP settings and press the OK key. When prompted for a PIN code, enter the 

PIN code (default 0000), and then press the OK key.

3. Choose 

Change PIN code and press the OK key.

4. 

Enter a new 4-digit PIN code.

5. Press 

the 

OK key. Save appears in the display.

6. Press 

Yes to save the PIN code.

7. 

For future reference, record the new PIN code.