Aastra Telecom 6757I User Manual

Model 6757i IP Phone User Guide

 

149

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this 

by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) after any 

hard-coded keys have been added. If a particular key is not defined, it is ignored.

Use the following procedure to configure an Empty softkey on the 6757i phone.

1. Click on Operation->Softkeys and XML.

or
Click on Operation->Expansion Module <N>.

2. Select from “Key 1” through “Key 10” on the Top keys.

or
Select from "Key 1" through "Key 20" on the Bottom keys.

3. In the "Type" field, select Empty.

4. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want 

to apply to this softkey.