Panasonic Section 520 User Manual

Chapter 3. Installation

Section 520 - TSAPI

8

Issued April 2000

DBS-92-520

1.  Enter the DBS programming mode

2.  Set the API port to Telephony Services as follows:.

Note: The Telephony Services NLM defaults to use the first port (41). 

3.  Set the Telephony Services API Port Baud rate to the desired baud rate as 

follows:.

Note: If Telephony Services is the only connection to the API card, it is 
recommended that the baud rate be set to19200. If both API ports are 
used, it is recommended that both baud rates be set to 9600 bps.

Program 
Name

API Port Type

Address

FF1 2# 1# (41 or 42)# 1# (0-1)#

Program 
Name

API Baud Rate

Address

FF1 2# 1# (41 or 42)# 2# (0-1)#

API Port Number  

41 = Port 1
42 = Port 2

Port Type:

1 = Telephony Services protocol

Baud Rate:

1 = 19200

API Port Number  

41 = Port 1

42 = Port 2