Panasonic Section 520 User Manual
Section 520 - TSAPI
Chapter 3. Installation
DBS-92-520
Issued April 2000
15
8. The Quick Add dialog box will appear. Enter the following information in
the appropriate fields.
•
User Login. This is the NetWare log-in identifier for the user. This
must match the user’s NetWare log-in previously set up on the
server.
must match the user’s NetWare log-in previously set up on the
server.
•
User Name. If desired, enter the name of the user. This information
is optional and is provided for the convenience of the network
administrator.
is optional and is provided for the convenience of the network
administrator.
•
PBX. Select the appropriate PBX the user is to be linked to.
•
Primary Device ID. Enter an identifier for the user’s primary
device. This is usually the extension of the primary voice telephone
at the worktop.
device. This is usually the extension of the primary voice telephone
at the worktop.
•
Worktop Name. Enter the name chosen for the user’s worktop
when it was created. The worktop associates the user’s phone with
the user’s PC.
when it was created. The worktop associates the user’s phone with
the user’s PC.
9. Click “Add Data” to record the information for the user.
10. Click “Close” to close the “Quick Add” dialog box.