Panasonic 524X07801B User Manual
140
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To outdial from the Call Log:
To store the Call Log number in a personal speed dial:
Hardware Requirements
•
Caller ID daughter circuit card on the Loop Start Trunk Card if a Loop Start Trunk receives the
call.
call.
•
ISDN (PRI-T Point) if ISDN card receives the call.
•
Large Display Telephone or 44-Series Small Display Telephone.
Action
Result
1. Go off-hook or press On/Off.
Intercom dial tone
2. Dial the Call Log feature code (default = CONF 96).
Phone enters call log mode.
3. Press the following keys to view the call log:
# - Move forward in call log
* - Move back in call log
NEXT - View the next 5 calls
PREV - View the previous 5 calls
4. To return a call, (and exit the Call Log)
Press the Soft key to the left of the desired number to
access Access MCO 1 (dial “9”), dial add digits (usu-
ally
access Access MCO 1 (dial “9”), dial add digits (usu-
ally
“1”
), and dial the displayed caller ID #
or
Press the Soft key to the right of the desired number to
access MCO 1 (dial “9”), and dial the caller ID #
access MCO 1 (dial “9”), and dial the caller ID #
Action
Result
1. Go off-hook or press On/Off.
Intercom dial tone
2. Dial the Call Log feature code (default = CONF 96).
Phone enters call log mode.
3. Press the following keys to view the call log:
# - Move forward in call log
* - Move back in call log
NEXT - View the next 5 calls
PREV - View the previous 5 calls
4. To store the call log number in a personal speed dial:
Press PROG, the speed dial bin number (80 - 99) and
press the left Soft key (to dial the add digits,usually an
area code) and HOLD
press the left Soft key (to dial the add digits,usually an
area code) and HOLD
or
Press PROG, the speed dial bin number (80 - 99) and
press the right Soft key and press HOLD
press the right Soft key and press HOLD