Panasonic 524X07801B User Manual

Page of 334
154
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Considerations
If a new code is programmed into a key, the previously programmed code is erased.
FF keys assigned as CO lines must be cleared using system programming before new FF 
assignments can be made.
The System can be programmed so that MCO 1 Trunk Access calls automatically use Automatic 
Route Selection (ARS).
The ANSWER key functions as listed in the table below.  
The RELEASE key functions as listed in the table below.  
Table 13. Feature access codes for FF key assignments
Status
Condition
Operation when ANSWER key is pressed
Idle
No incoming ring
Ignore.
Incoming ring
Monitor ON (speaker) - Auto Answer for incoming ring.
Off-Hook
Off-hook signaling
Answer for off-hook signaling. Current conversation will be 
put on hold automatically.
No off-hook signaling
Ignore.
NOTE: When the extension has 1 non-appearing CO on hold and 1 non-appearing CO at talk, ANSWER key oper-
ation is ignored and you can’t put the 2nd non-appearing CO on hold.
Status
Condition
Operation when RELEASE key is pressed
Idle
--
Ignore.
Monitor ON (speaker) 
or Headset Mode
Several held calls
Latest held call will be transferred; phone returns to idle sta-
tus (Monitor OFF).
No held calls
Current call (talk) will be released; phone returns to idle sta-
tus (Monitor OFF).
Handset Off-Hook
Several held calls
Latest held call will be transferred; phone gets internal dial 
tone.
No held calls
Current call (talk) will be released; phone gets internal dial 
tone.
Feature Description
Fixed Feature Code
+ (additional digits to program into 
key)
Default Flexible Feature Code
(if not listed, must use Fixed Feature 
Code)
CO Trunk Key
#  + (Trunk 1-576)
MCO Key
1  + (Auto-Select Pattern 1-5; 
MCO-Incoming Trk Grp 00-99)
Virtual Port Key
9 + (Virtual Port 001-576)
BLF/DSS Outgoing
9 + (Extension 0-9999)
BLF/DSS Immediate Ring
81 + (Extension 0-9999)
BLF Delayed Ring
82 + (Extension 0-9999)