Panasonic 524X07801B User Manual
Section 700 - Operation
Chapter 5. Key Telephone Features
576-13-700
DBS 576 (USA), Revised 6/11/98
173
To answer a call after it has been announced using the OHVA:
Hardware Requirements
•
N/A
Related Programming
•
FF1 0 03: Extension COS OHVA Originate
•
FF1 0 03: Extension COS OHVA Receive
•
FF3: Extension COS Assignments
•
FF4: FF Key Assignments
Considerations
•
The held call is transferred as soon as the extension sending the OHVA hangs up.
•
If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by transfer recall timer.
the extension sending the OHVA by transfer recall timer.
•
You cannot receive a Call Waiting message during an OHVA.
•
If a Split key is assigned to the extension that receives an OHVA call, when an OHVA is being
received, the Split key blinks green. If the split key is pressed during an OHVA call to answer,
the Split key lights red. If the split key is pressed again to terminate the OHVA conversation, the
Split key extinguishes.
received, the Split key blinks green. If the split key is pressed during an OHVA call to answer,
the Split key lights red. If the split key is pressed again to terminate the OHVA conversation, the
Split key extinguishes.
•
If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.
One-Touch Keys
CPC-96, CPC-288, and CPC-576 All Versions
Description
You can use one-touch keys to store telephone numbers, speed dial numbers, or feature access codes.
To dial the stored number, you go offhook and press the desired key.
Operation
To program a one-touch key for outside telephone numbers:
Action
Result
1. Replace the handset.
Your extension rings
2. Lift the handset or press the ON/OFF key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Press the PROG key.
3. Press the one-touch key to be programmed.