Panasonic 524X07801B User Manual
218
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 6. DSLT Features
Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transfered call park:
Hardware Requirements
•
N/A
Related Programming
•
FF1 (System): Extension Park Hold Recall Timer
Considerations
•
You cannot park more than one call at a time.
•
No more than one Call Park Answer key may be assigned to a single telephone.
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Enter the Call Park Answer/Other Ext. access code (default
773).
3. Dial the number of the extension that parked the call.
• Connected to parked call
Action
Result
1. Press the HOLD key.
• Current call on hold
•
2. Enter the Call Park Transfer access code (default 774)
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
Action
Result
1. At the extension with the transfered park call, lift the hand-
set or press the ON/OFF key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default 772).
• Connected to parked call