Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. KX-FPG378
  5. User Manual

Panasonic KX-FPG378 User Manual

Download
Page of 110
8. Programmable Features
69
8.3 Basic features
{#}{
0}{0} Setting the Quick Setup
QUICK SETUP
PRESS SET
L
Press {SET} 2 times before pressing the 
direct command button. See page 21 for 
details.
{
1} “
TAM/FAX” (default)
{
2} “
DIST. RING”
{
3} “
TEL ONLY”
{
4} “
FAX ONLY”
{#}{
0}{1} Setting the date and time
SET DATE & TIME
PRESS SET
L
Enter the date and time using the dial 
keypad. See page 29 for details.
{#}{
0}{2} Setting your logo
YOUR LOGO
PRESS SET
L
Enter your logo using the dial keypad. See 
page 30 for details.
{#}{
0}{3} Setting your fax number
YOUR FAX NO.
PRESS SET
L
Enter your fax number using the dial keypad. 
See page 31 for details.
{#}{
0}{4} Printing a confirmation report
CONFIRM REPORT
MODE=ERROR
[
±]
To print a confirmation report for fax transmission 
results (page 48).
{
1} “
ON”: A confirmation report will be printed 
after every transmission.
{
2} “
OFF”: Confirmation reports will not be 
printed.
{
3} “
ERROR” (default): A confirmation report will 
be printed only when fax transmission fails.
{#}{
0}{6} Changing the ring setting in FAX 
ONLY mode
FAX RING COUNT
RINGS=3
[
±]
To change the number of rings before the unit 
answers a call in FAX ONLY mode.
{
1} “
1”
{
2} “
2”
{
3} “
3” (default)
{
4} “
4”
{#}{
0}{6} Changing the ring setting in 
TAM/FAX mode
TAM RING COUNT
RINGS=2
[
±]
To change the number of rings before the unit 
answers a call in TAM/FAX mode. See page 53 
for details.
{
2} “
2” (default)
{
3} “
3”
{
4} “
4”
{
5} “
5”
{
6} “
6”
{
7} “
7”
{
0} “
TOLL SAVER”
Note:
L
You can also program this feature with the 
handset (page 77).
{#}{
1}{0} Changing the maximum recording 
time for incoming messages
RECORDING TIME
MODE=3 MIN
[
±]
{
1} “
1 MIN”: 1 minute
{
2} “
2 MIN”: 2 minutes
{
3} “
3 MIN” (default): 3 minutes
{
0} “
GREETING ONLY”: Only plays the greeting 
message.
Note:
L
If you select “
GREETING ONLY”, the unit will 
answer a call with the greeting message, and 
then hang up. The unit will not record any 
incoming messages.
L
You can also program this feature with the 
handset (page 77).
{#}{
1}{1} Setting the remote operation ID
REMOTE TAM ID
ID=11
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Enter a 2-digit number (00–99).
L
The default ID is “
11”.
4. Press {SET}.
5. Press {MENU}.
Note:
L
You can also program this feature with the 
handset (page 77).
FPG379-PFQX2138ZA-en.book  Page 69  Wednesday, January 12, 2005  4:49 PM