Nortel Networks 1000E User Manual

 Installing and configuring a Voice Gateway Media Card

Communication Server 1000E

Installation and Configuration

Exit from LD 14. Enter the command:

Perform a datadump to save configuration changes. Complete the steps in 
Procedure 97: "Performing a datadump using Element Manager" on 

MAXU

32

24

32 is the maximum number of voice Media Gateway channels on 
the Media Card.

For MG 1000T when XTRK = ITG2

24 is the maximum number of voice Media Gateway channels on 
the ITG-P Line card.

IPTN

YES

ITG Physical TN. 

ZONE

0-255

MG 1000T Zone number to which the Voice Gateway Media Card 
Physical TNs belong.

Verify that the zone exists in LD 117.

The ZONE prompt is not available when configuring VGW in an 
MG 1000E. The VGWs are assigned the same zone as the 
MG 1000E.

Note: If the Zone of an MG 1000E is changed, all VGW in the 
MG 1000E must be removed and reconfigured to assume the 
new Zone of the MG 1000E.

CUST

xx

The customer to which the IPTN resources are assigned.

Note: This means that for multi-customer CS 1000E systems, 
each customer must have a dedicated IP Telephony node for 
IP Phones.