Clarity C510 User Manual

Follow these instructions to place the
phone on a desk or table top using the
supplied bracket.

1. Plug one end of the long flat tele-

phone line cord into the jack 
marked TEL LINE located on the 
back of the telephone. Route the 
cord through the narrow groove 
and plug the other end into the 
telephone wall jack.

2. Insert the plug of the AC adapter 

into the jack marked 12 VDC locat-
ed on the back of the base unit.
Route the cord through the narrow 
groove and plug the other end into 
an electrical outlet.

3. Place the mounting bracket on the 

telephone with the wide end of the 
mounting bracket towards the top 
of the telephone. Insert the 
mounting bracket’s lower tabs into 
the base’s lower tab slots.
Depress the tabs located at the 
top of the mounting bracket and 
insert them into the upper tab 
slots. Release the tabs to lock 
the mounting bracket into place.

4. Plug one end of the modular 

coiled handset cord into the hand
set. Plug the other end into the 
jack marked HANDSET located on 
the lower left side of the telephone.
Place the handset in the cradle.

5. Set the TONE/PULSE switch 

located on the back of the base to 
correct dialing mode. Please 
check with your local telephone 
company if uncertain of the type 
of service.

6. Adjust the LCD display to desired 

viewing angle.

Warning: Use only the power adapter
provided with this telephone. Use of any
other adapter may damage the product
and result in injury.

9