Vidikron Vision 10 User Manual
48
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
Blue Enable: Refer to Blue Enable on page 44.
Splash Screen Timer: Press the right- or left-arrow buttons to set the Splash Screen Timer.
This timer controls how long the startup (ISF and Vidikron logo) image stays on-screen after
you turn on the projector. Select from 15 to 60 seconds, in 5-second increments.
This timer controls how long the startup (ISF and Vidikron logo) image stays on-screen after
you turn on the projector. Select from 15 to 60 seconds, in 5-second increments.
Noise Reduction: To apply Digital Noise Reduction (DNR) to the input signal, select Noise
Reduction from the ISF Calibration menu. Noise reduction is useful for clearing up noisy RGB
images such as those from a PC. Adjust as desired using the left- or right-arrow buttons,
keeping in mind that reducing noise (which reduces high frequencies) may also “soften” the
image.
Reduction from the ISF Calibration menu. Noise reduction is useful for clearing up noisy RGB
images such as those from a PC. Adjust as desired using the left- or right-arrow buttons,
keeping in mind that reducing noise (which reduces high frequencies) may also “soften” the
image.