Vidikron Vision 10 User Manual
50
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
5.3
Cleaning the Intake and
Exhaust Vents
Cleaning the Intake and
Exhaust Vents
This Vision 10/12 is equipped with intake and
exhaust vents to allow the flow of cool air
through the projector and maintain the
proper operating temperature.
exhaust vents to allow the flow of cool air
through the projector and maintain the
proper operating temperature.
You should periodically clean the vents by
vacuuming them with a vacuum cleaner.
Vidikron recommends doing this after every
100 hours of use, or more often if the
projector is used in a dirty or smoky location.
vacuuming them with a vacuum cleaner.
Vidikron recommends doing this after every
100 hours of use, or more often if the
projector is used in a dirty or smoky location.
To clean the intake and exhaust vents:
1.
Press OFF on the remote control to turn
off the power. Wait until the cooling fan
stops.
off the power. Wait until the cooling fan
stops.
2.
Unplug the power cord.
3.
Remove dust by placing the cleaner hose
on the intake and exhaust vents.
on the intake and exhaust vents.
Side and front view
Ventilation holes
Power OFF
button
button