Leica CM3050 S User Manual
26
Instruction Manual V1.2 - 11/2006
5.2
Switching on/fuses
Switching on
•
To switch on the instrument, place switch (1)
in upper lock-in position.
in upper lock-in position.
Mains switch / automatic cutout for the
instrument:
instrument:
In addition to its function as ON/OFF switch,
switch (1) is also the automatic cutout for the in-
strument.
switch (1) is also the automatic cutout for the in-
strument.
If the automatic cutout has been triggered (e.g.
caused by overcurrent):
caused by overcurrent):
•
Put switch (1) back in upper lock-in position.
1
(Combination Mains switch /
automatic cutout for the
instrument)
automatic cutout for the
instrument)
2
(Automatic cutout
for sectioning
motor)
for sectioning
motor)
Automatic cutout for sectioning motor:
The instrument is equipped with an automatic
cutout (2) for the sectioning motor.
cutout (2) for the sectioning motor.
If the sectioning motor is overloaded (e.g. when
sectioning extremely hard specimens etc.) the
automatic cutout (2) will be triggered.
sectioning extremely hard specimens etc.) the
automatic cutout (2) will be triggered.
To make the instrument functional again after
the automatic cutout (2) has been triggered:
the automatic cutout (2) has been triggered:
•
Push automatic cutout (2) inwards until it
locks into position.
locks into position.
5.
Operation