Sony KP-41PX1K User Manual

Optional Connections

Smartlink is a direct link between your projection TV set and a VCR.

• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.

Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.

• A fully-wired 21 pin SCART cable to connect your VCR to the Euro AV connector :3
  (SMARTLINK) on the rear of the Projection TV.

• Tuning information such as the channel overview are downloaded from the Projection TV set 

to the VCR.

• Direct projection TV recording: While watching TV you need to press just one button on the 

VCR to record this programme.

• Projection TV in standby mode: Press the "Play z" button on your VCR to switch the TV 

automatically on.

If you have connected a decoder to a VCR which supports Smartlink feature, select the 
menu Further Programme Preset in the 

 (PRESET) menu and select DECODER AV3 

to each codified channel. For more details, please refer to the section "Using the Further 
Programme Preset function" of this instruction manual.

For more information on Smartlink, please refer to the Instruction Manual of your
VCR.

Using the buttons underneath the cover of the remote control you can
control other Sony equipment.

 

Open the cover of the Remote Control.

Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1

Beta VCR

VTR 2

8 mm VCR

VTR 3

VHS VCR

VTR 4

Digital Video (DCR-VX 1000/9000 E, VHR-1000)

DVD

Digital Video Disk

Use the buttons underneath the cover on the remote control to operate the 
equipment.

• If your video equipment has a COMMAND MODE selector, set this

selector to the same position as the VTR 1234 DVD selector on the 
TV Remote Control.

• If the equipment does not have a certain function, the corresponding

button on the remote control does not work.

Rear of projection TV

VCR

Decoder

VIDEO

TV

VTR 1 2 3 4  DVD

C H

C H

VTR 1 2 3 4  DVD

01GBK.fm  Page 28  Tuesday, October 23, 2001  5:03 PM