Panasonic PT-AE8000U User Manual
[OPTION] menu
82 - ENGLISH
Settings
■ [POWER ON LINK]
Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.
on when it is in standby by operating external devices.
Switch settings
Switch settings
[NO]
Inactive
[YES]
Switch projector power on along
with external devices
Note
z
Depending on the external device, the projector may
automatically turn on when some functions of the
connected devices are used. (Only in standby)
z
Due to the projector’s characteristics, it takes time
before projection begins. Please be aware that video
may already have started by the time the projector is
operating fully.
■ [POWER OFF LINK]
Specify whether to switch the power off for external devices
when this projector is set to standby.
when this projector is set to standby.
Switch settings
Switch settings
[YES]
Switch the power of external
devices off along with this
projector
[NO]
Do not switch the power of
external devices off along with
this projector
Note
z
This function works even if the projector enters standby
mode automatically through the [SLEEP] function.
z
There are cases where some external devices may
not be switched off depending on their status (currently
recording etc.)
■ [ENERGY SAVING MODE]
Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.
devices to the mode with minimum power consumption
when the projector is set to standby.
Switch settings
Switch settings
[QUICK
START]
Do not switch
[SAVE]
Switch the mode of external
devices to the mode with
minimum power consumption
Note
z
This function works when [POWER OFF LINK] is set to
[YES].
z
Depending on the external devices, when the projector
is turned on power consumption may increase even in
[ENERGY SAVING MODE] mode in order to achieve
faster start up.
■ [UNUSED DEVICE ENERGY SAVE]
Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [YES (WITH PROMPT)], a message is
displayed before the function operates.
devices selected for input and switch the power off for
external devices not selected for input.
If you select [YES (WITH PROMPT)], a message is
displayed before the function operates.
Switch settings
Switch settings
[NO (STAY
ON)]
Maintain the power on state of
devices for which input is not
selected
[YES (WITH
PROMPT)]
After a confirmation message is
displayed, devices for which the
input is not selected are set to
standby mode
[YES (NO
PROMPT)]
Devices for which the input is not
selected are set to standby mode
Note
z
This function may not work properly depending on the
external device.