Panasonic TX-47P950A User Manual

Before Manual Tune, Regional System must already be set (Refer to page 16).

1

2

Press to select the MANUAL TUNE.

Press to access to the MANUAL TUNE.

Press to select the desired Programme Number.

Press to select the higher or lower channel.

Search Start.

When a station is found.

When the desired station is found, press to store.
The tuning position is memorized.

Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.

Press to display the MAIN MENU, and then to the SETUP menu.

Proceed to the TUNING MENU, and then to the SOUND SYS (refer to page 15).

Adjust the Sound System (refer to page 18 step 2 to 3).

(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour System

Selection” operation on page 21.

(2)

(3) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated in the

instruction manual of VCR and to set the designated channel to programme No. “0”. In that case, perform manual tune after
setting the colour system and sound system in advance. Further, in multi-system VCR, it is more convenient to set the designated
channel to several programme Numbers.

After the Manual tune or the Automatic tune is finished, under the normal viewing condition press this button to
confirm the tuning condition for each Programme Number. If some Programme Numbers are unused (no TV
stations), it is possible to skip such Programme Numbers. Please refer to the Programme Number Skip operation
on page 20.

MENU

TV/AV

OK