Panasonic TX-47P950A User Manual

Press to select the SKIP.

Press to change the mode to “OFF”.

Press to store the Skip function.

This function is used only in the TV mode when the sound is not clear or no sound is produced on a Programme Number, and is not
applicable in AV mode.

Press to select the “SOUND SYS”.

Press until the optimum sound is obtained.

The sound system will change as shown.

4.5MHz

6.5MHz

5.5MHz

6.0MHz

Sound System
Condition.

Note:
These are different sound broadcast transmission systems applicable to differing countries.

Press to store the Sound System.

Press to exit from the “SOUND SYS”.
This returns the set to the normal viewing condition.

TV/AV

If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.

Press to select the “COLOUR SYS”.

Press to produce the optimum image.

The colour system will change as shown.

AUTO

PAL

NTSC3.58

NTSC4.43

SECAM

Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries. NTSC
4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL television equipment.

Press to store the Colour System.

Press to exit from the “COLOUR SYS”.

This returns the set to the normal viewing condition.

Colour System
Condition.

OK

OK

TV/AV

OK