Panasonic PT-LW80NTE User Manual

1. Switch on the connected devices.

 

Press the play button of the required device.

2. Detect the input signal automatically.
3. Switch the aspect ratio automatically.

1. Place the projector at the right angle from the 

screen.

2. Adjust the vertical angle of the projector.

 

Press the front leg adjuster buttons and adjust the 
vertical angle.

 

3. Open the Zoom-Focus ring cover.

 

4. Turn the zoom and focus rings to adjust the 

projected image.

 

You can confirm the adjusted effect with the TEST 
PATTERN in OPTION menu. See “TEST PATTERN” 
on page 39.

5. Close the Zoom-Focus ring cover.

 

• If the SIGNAL SEARCH in OPTION menu is 

deactivated, select the required input method by 
pressing the INPUT SELECT buttons of the remote 
control or the INPUT SELECT button of the projector 
several times. See “SIGNAL SEARCH” on page 38, 
“Switching the input signal” on page 26 or “INPUT 
SELECT button” on page 14.

• See “ASPECT” on page 35.

Screen

• Do not touch the air exhaust port as this may cause 

burns or injury.

• If keystone distortion occurs, see “KEYSTONE” on 

• When you adjust the zoom after adjusting the focus, 

you may need to adjust the focus of the image again.

Focus ring
Zoom ring