Sony KDS-Z60XBR5 User Manual
11
G
e
tting Started
When using other TV stands
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
stand with a wood screw (supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
screws
securing strength is not enough, use commercial
screws
1
/
8
to
3
/
16
inch (3 to 4 mm) diameter to fit to the
TV stand. Consult your dealer about the types of
screw(s).
screw(s).
Keep your TV at least 4 inches (10 cm) away from
the wall to provide proper ventilation. Blocking
the ventilation opening of the cooling fan may
damage the TV.
the wall to provide proper ventilation. Blocking
the ventilation opening of the cooling fan may
damage the TV.
~
• Do not install the TV near any ventilation, as it may
affect the normal TV operating temperature.
• Be sure that the ventilation opening on the side of the
TV is not blocked by curtains or other materials.
• Dirt may accumulate near the ventilation when the TV
is placed against the wall depending on its material.
2
3
3
1
TV
stand
stand
Table-Top
Stand
Stand
When Installing Your TV against a Wall
12 inches
(approx. 30 cm)
(approx. 30 cm)
4 inches
(10 cm)
4 inches
(10 cm)
(10 cm)
Never install the TV as follows:
Air circulation is blocked.
Air blown into cooling fan.