Sony KDS-Z60XBR5 User Manual

Your viewing position may affect the picture 
quality.
For the best picture quality, install your TV within 
the areas shown below.

To minimize reflection, the screen surface has a 
special coating.
Inappropriate cleaning methods could damage the 
screen surface. Special care is required.

Dust and dirt on the screen can affect the picture 
quality. To dust off the screen use a soft cloth. Be 
sure to follow the cleaning instruction on page 7 
for stubborn stains and dirt.

When high contrast non-moving images such as 
station logos and channel numbers are displayed 
for a long period of time, there may be some image 
retention on the screen. This is only a temporary 
condition. Turning off the power for a while or 
letting the TV run on another channel will 
eliminate the image retention.

Your TV uses a projection lamp as its light source. 
As with any lamp, it has a lifespan and needs to be 
replaced when the Lamp Indicator flashes or the 
screen becomes darker. Your TV also has a 
function to display a message, “Projection lamp is 
nearing end of life. Please replace the lamp.” to let 
you know that the lamp has reached its expected 
lifespan. Note the following:
s

After turning on your TV, it may take a while 
(one minute or less) before the picture 
appears.

s

When the projection lamp wears out, the 
screen goes dark. Replace the lamp with a 
new Sony XL-5200

 

replacement lamp (not 

supplied).

s

After lamp is replaced, please set the Lamp 
Replacement option in the General 
settings (see page 48).

“How to Replace the Lamp”, see page 49.

~

• The light emitted from the lamp is quite bright when 

your TV is in use. To avoid eye discomfort or injury, 
do not look into the light housing when the power is 
on.

KDS-Z60XBR5
KDS-Z70XBR5

min. 7.0 ft. (approx. 2.2 m)
min. 8.0 ft. (approx. 2.4 - 2.5 m)

Horizontal Viewing Area

Vertical Viewing Area