Sharp PG-A10S User Manual

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is inverted.

■ Place a translucent screen between the projector and the

audience.

■ Reverse the image by setting “Rear” in the “PRJ Mode” menu.

See page 50 for use of this function.

■ Place a mirror (normal flat type) in front of the lens.

• When using a mirror, be sure to carefully position both the

projector and the mirror so the light does not shine into the
eyes of the audience.

■ It is recommended that you use the optional Sharp ceiling-

mount bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately.)
• AN-PGCM95 ceiling-mount bracket, its AN-EP101B

extension tube and AN-JT299 universal bracket, adaptor
for non-level ceiling installation (for U.S.A.).

• BB-A10T ceiling adaptor, its BB-NVHOLDER280, BB-

NVHOLDER550, BB-NVHOLDER900 ceiling mount
systems (for GERMANY).

• AN-A10T ceiling-mount bracket, its AN-TK201 and AN-

TK202 extension tubes (for countries other than the U.S.A.
and GERMANY).

■ Be sure to adjust the position of the

projector to match the distance (H)
from the lens center position (see
page 24) to the lower edge of the im-
age, when mounting the projector on
the ceiling.

■ Invert the image by setting

“Ceiling+Front” in the
“PRJ Mode” menu. See
page  50 for use of this
function.

A10X_A10S#E_Print#p21_25.p65

03.2.4, 2:02 PM

25