Unitech 38647G User Manual

Chapter 5

   

Advanced Settings

43

The Power Properties window appears.

2. The Battery tab displays the External (Main) 

and Backup battery capacity status.
For example, the screenshot on the right 
shows both batteries are in “Good” condi-
tion.

NOTE:

Charge the Backup Battery when it 
reaches “Low” or “Very Low” battery 
status. If the battery does not accept 
a charge, contact Unitech Technical 
Support.

Extend the PA600’s battery life by doing either of the following:

•

Change the automatic power settings.

•

Minimize backlight use.

The PA600 enters idle mode when there is no task, or all tasks are waiting for input. In 
the default setting, the PA600 automatically turns off when it remains idle for three 
minutes without an external power source. Pressing the power button returns the 
PA600 to the same point at the time of automatic shutdown.
Change the automatic power settings through the following:

1. In the Power Properties window tap the Schemes tab.
2. Tap the arrows from the drop down menus to 

select time periods for Switch state to User 
Idle:, Switch state to System Idle: or 
Switch state to Suspend:. The available 
time periods are 1, 2, 3, 4, 5, 10, 30 minutes 
and never.

3. This function can also activate when the 

PA600 is plugged into the AC Adapter or 
placed in its docking station. Select AC 
Power from the Power Scheme: drop down 
menu, and select a time period from the 
drop down menus. The available time peri-
ods are 1, 2, 5,10, 15, 30 minutes and never.