Unitech 38647G User Manual
44
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Adjusting Backlight Setting
The PA600’s LCD backlight consumes a large amount of battery power, only use this
function if it is necessary.
If a backlight is required, set “automatically turn off the backlight” function.
Change the backlight settings through the following:
function if it is necessary.
If a backlight is required, set “automatically turn off the backlight” function.
Change the backlight settings through the following:
1. Tap Start
→ Settings → Control Panel.
2. Double-tap Backlight, and the Backlight
screen appears.
3. Do any of the following:
– Select Battery Power, tap the Dim Back-
light if device is not used for: check box
and select the amount of time from the
drop down menu before the backlight dims
while running in battery power mode.
and select the amount of time from the
drop down menu before the backlight dims
while running in battery power mode.
– Select External Power, tap the Dim
Backlight if device is not used for:
check box and select the amount of time
from the drop down menu before the back-
light dims while running in external power
mode.
check box and select the amount of time
from the drop down menu before the back-
light dims while running in external power
mode.
– Tap the Turn on Backlight when... check-
box to activate the backlight when the key-
pad is pressed or the screen is tapped.
pad is pressed or the screen is tapped.