Avaya S8100 User Manual
2 Connectivity and access to an S8100 system
Physical connections
150
S8100 Installation and Upgrades
November 2003
Create a connection icon
on page 150. Otherwise, follow these
steps:
1
Double-click Make New Connection on the Network Neighborhood Dialup Server
Control Panel.
Control Panel.
2
Enter the name of the computer you are dialing and select the appropriate modem.
3
Click Next.
4
Enter the area code and phone number of the system you are calling, then click Next.
5
Click Finish. The new icon appears in the Dial-Up Networking dialog.
6
Right-click the new icon to enable the associated properties window.
7
Click the Server Types tab of the associated properties window.
8
Select TCP/IP.
9
Click the TCP/IP Settings button. The TCP/IP Settings dialog displays:
10
Select Server assigned IP address.
11
Select Server assigned name server addresses.
12
Select Use IP header compression, and ensure that the Use default gateway on remote
network is not checked.
network is not checked.
13
Click OK.
14
The user name on this dialog must be “rasaccess” with the appropriate password. The
password is the same for each S8100 system being contacted.
password is the same for each S8100 system being contacted.
15
Click Connect.