Avaya S8100 User Manual
2 Connectivity and access to an S8100 system
Access methods
152
S8100 Installation and Upgrades
November 2003
Via a Telnet session
Use this access method to:
•
Register S8100 system with INADS
•
Activate license files
•
Execute GAS commands from a bash shell
•
Access S8100 system SAT session
•
Set up the IP address for S8100 system using setip command
on page 296 for more information about connecting via Telnet.
NOTE:
The IP address differs depending on the type of physical connection established. See
1
On the laptop, click Start
→
Run from the Windows task bar. The Run dialog displays.
2
Enter telnet <S8100 IP Address>. If you are connected directly to the RJ45 service jack on the
TN2314, use 192.11.13.6 for the IP address. If you are on the customer LAN, use the IP address
of the S8100 server. Click OK.
TN2314, use 192.11.13.6 for the IP address. If you are on the customer LAN, use the IP address
of the S8100 server. Click OK.
A Telnet session opens on your desktop.
NOTE:
There are 2 different scenarios, depending on whether the license file has already been
installed.
installed.
a
If no license file is installed, you are prompted for your login and password. The only
valid login is lucent3. Enter lucent3 and continue to step 3.
valid login is lucent3. Enter lucent3 and continue to step 3.
.