Avaya S8100 User Manual
2 Connectivity and access to an S8100 system
Access methods
156
S8100 Installation and Upgrades
November 2003
Logging into the S8100 Windows 2000
desktop
desktop
1
On the Web Interface home page, click ‘Administer System’ and login using lucent3 for login and
password. A domain is not required. Select 'continue' at license agreement window.
password. A domain is not required. Select 'continue' at license agreement window.
2
Click ‘Login to 192’ under Remote Control – Terminal Services.
3
If a VBScript error message appears, click OK.
4
Click the Connect button (leave the Server field blank).
5
If a VBScript message about fullsceen mode appears, click OK (you can resize the Terminal
Services screen to full size by pressing ctlr-alt-Pause). A login window will open.
Services screen to full size by pressing ctlr-alt-Pause). A login window will open.
6
Login using lucent3. After login, the S8100 Windows 2000 desktop is displayed.
Remotely using Avaya Site Administration
If a customer wishes to dial in remotely using Avaya Site Administration, they must create a Windows 95
or Windows 2000 login with dialin permissions or give those permissions to an existing login. They
should not receive the rasaccess login password, but they may receive the rasaccess IP address. They
require the address to set up Avaya Site Administration or web-access connections to the system.
or Windows 2000 login with dialin permissions or give those permissions to an existing login. They
should not receive the rasaccess login password, but they may receive the rasaccess IP address. They
require the address to set up Avaya Site Administration or web-access connections to the system.
Dial-in permissions to an existing login
The system administrator can give dial-in permissions to an existing login by the following procedure:
1
Go to Start> Programs> Administrative Tools (Common).
2
Click User Manager.
3
Double-click an existing login that will be dialing in.
4
At the bottom of the User Properties window, click the Dialin icon.
5
Select the Grant dialin permission to user and No Call Back options, and click OK.
6
Click OK, and again in the User Properties window.
7
Exit User Manager.
Creating a login for remote access
The system administrator can create a login for remote access as follows:
1
Go to Start> Programs> Administrative Tools (Common).
2
Click User Manager.
3
On the top toolbar, click User, and select New User.
4
In the dialog, assign the Username (this is the login) and the Password.
NOTE:
Full Name and Description are optional. The Options check boxes are the customer’s
choice, but it is recommended that User Cannot Change Password and Password Never
Expires should be the only ones checked.
choice, but it is recommended that User Cannot Change Password and Password Never
Expires should be the only ones checked.
5
Click Groups at the bottom of the dialog.